- Make sure this fits by entering your model number.
- 1. Alarm or chime function
- 2. Flexible orientable base for wall mounting
- 3. 6m detection range, 120 dB volume
- 4. Including all necessary batteries (3x AA, 1x CR2032)
- 5. With remote control
By pressing a key on the remote control of the alarm after 45 seconds is armed. When the PIR sensor detects movement now, sounds after a delay, a 120 dB loud alarm for 30 seconds. Then the tone for 15 seconds switches off and rechecked the environment. If then a movement are detected, the alarm sounds again. This cycle repeats itself until the device is disabled on the remote control. Alternatively, you can switch directly to the remote control for the Gong function. Now, if motion is detected, sounds immediately and without delay a gong.
As a third function, there is the panic mode. If you press 2 seconds both buttons on the remote control is activated on the location of the alarm.
Including all necessary batteries (3x AA, 1x CR2032)
Flexible orientable base for wall mounting
Alarm or chime function
120 dB sound + flashing red LED
Acoustic feedback when arming
Optional remote control available